
Plastics
€€€€€ABS
Tough, low-cost, easy-to-machine and paintable thermoplastic. The default for indoor housings, covers and look-like prototypes; not for UV, heat or solvents.
Yükleniyor Loading Wird geladen
Filter materials by manufacturing process, 3D printing technology or properties such as heat resistance, food contact and weldability. Each guide brings the material's properties, suitable processes and design notes together on one page.

Plastics
€€€€€Tough, low-cost, easy-to-machine and paintable thermoplastic. The default for indoor housings, covers and look-like prototypes; not for UV, heat or solvents.

Plastics
Tough, transparent engineering plastic with high impact strength and service up to about 115–125 °C. Standard for machine guards, covers and clear housings; sensitive to solvents and scratches.

Plastics
High-performance semi-crystalline polymer for continuous service up to about 250 °C, with outstanding chemical, wear and hydrolysis resistance. Machines to tight tolerances; stock costs roughly 10–15× ABS.

Plastics
Tough, easy-to-process copolyester for low-warp FDM prototypes, clear covers and molded packaging-type parts. Better chemical resistance than ABS, but limited to about 60–70 °C.

Plastics
Bio-based thermoplastic and the easiest FDM material to print: stiff, accurate and low-warp, but brittle and soft above about 50–55 °C. The default for visual prototypes, fit checks and indoor fixtures that never get warm.

Plastics
Weather-resistant styrenic: ABS-like toughness and processing, with an acrylate rubber that resists UV yellowing and embrittlement. The default for outdoor housings and trim, from FDM prototypes to injection-molded production.

Plastics
Low-cost, low-density semi-crystalline thermoplastic with excellent chemical and fatigue resistance. The default for living hinges, snap-fit closures and high-volume molded parts.

Composites
€€€€€PLA filled with chopped carbon fiber: stiffer, lower-warp and with a fine matte finish, but more brittle than plain PLA and still limited to about 50–55 °C. For stiff jigs, fixtures and premium-looking indoor parts.

Plastics
€€€€€Amorphous, inherently flame-retardant high-performance plastic. ULTEM 9085 and 1010 are the industrial FDM grades for aircraft interior parts, composite tooling and hot fixtures; PEI rod and plate are also CNC machined.

Plastics
€€€€€High-performance PAEK polymer with a higher glass transition than PEEK and slower, adjustable crystallization that makes it easier to print. For FDM parts that need heat, chemical and flame resistance, such as aerospace brackets, ducts and tooling.

Composites
€€€€€PETG filled with chopped carbon fiber: stiffer and more dimensionally stable than PETG, tougher and more heat-resistant than CF-PLA. For functional fixtures, brackets and housings that see mild heat, moisture or chemicals up to about 65–70 °C.

Plastics
€€€€€Semi-crystalline high-temperature polymer with outstanding chemical resistance, inherent flame retardancy and almost no moisture uptake. Mostly glass-filled for molded and machined parts up to about 200–220 °C; printed PPS suits chemical-exposed fixtures.

Elastomers
€€€€€Soft, rubber-like FDM filament in the Shore 60A to 90A range, softer than TPU 95A. For grips, feet, dampers, soft covers and flexible prototypes; slow to print, and no substitute for silicone in heat or long-term sealing.

Plastics
General-purpose photopolymer for SLA and DLP printing: the smoothest surfaces and finest detail of any common 3D printing process, but brittle and heat-sensitive. The default for cosmetic prototypes, detailed models and casting masters.

Plastics
€€€€€Photopolymer that burns out cleanly in the investment casting flask, so a printed pattern replaces a wax model. For jewelry, dental frameworks and small precision castings in gold, silver, bronze and cobalt chrome; patterns need a resin burnout schedule.

Plastics
€€€€€Unpigmented photopolymer for SLA, DLP and MSLA that prints translucent and becomes close to transparent after sanding and polishing or a clear coat. For see-through prototypes, fluidic models and light covers; brittle and prone to yellowing.

Plastics
€€€€€Photopolymers for dentistry: accurate model resins and biocompatible grades for guides, splints and temporary crowns. Use in the mouth depends on the certified resin, a validated printer and post-processing workflow, and the device maker's regulatory duties.

Elastomers
€€€€€Soft, rubber-like photopolymers from about Shore 50A to 80A that bend, stretch and spring back. For soft-touch prototypes, small seals, grips and fine elastic details; less tear- and abrasion-resistant than TPU or silicone.

Plastics
€€€€€Heat-resistant photopolymer for SLA and DLP printing, reaching an HDT of roughly 100–250 °C or more after thermal post-cure. Used for low-volume mold inserts, heat-exposed fixtures and hot air or fluid flow tests; stiff but brittle.

Plastics
€€€€€Engineering photopolymers formulated to behave like ABS or polypropylene: far more impact- and fatigue-tolerant than standard resin, with the same smooth surface and fine detail. For snap-fits, enclosures, jigs and functional prototypes at room temperature.

Plastics
€€€€€Toughened photopolymer, mainly for MSLA printers, that is less brittle than standard resin while keeping fine detail and smooth surfaces. For handled and assembled prototypes, housings and detailed models; not a substitute for real ABS.

Plastics
€€€€€Photopolymer for MSLA and DLP whose uncured residue rinses off with water instead of solvent. Suited to visual models, miniatures and quick prototypes; more brittle and moisture-sensitive than standard resin, and the wash water is still chemical waste.

Plastics
Bio-based nylon from castor oil for powder-bed fusion. More ductile and impact-resistant than PA12 at similar strength, which makes it the choice for snap-fits, clips, hinges and parts that must survive drops.

Composites
€€€€€Nylon filled with glass beads or short glass fibers: stiffer, more heat-resistant and more dimensionally stable than unfilled PA12, but heavier and less tough. For housings, brackets, fixtures and parts near heat, printed by SLS, MJF or FDM.
