Uretyco
Make it now
Engineering Plastics, Compared: ABS, PC, PEEK, PA12, and Their Right Use Cases

Engineering Plastics, Compared: ABS, PC, PEEK, PA12, and Their Right Use Cases

Apr 18, 202610 min readMaterialsUretyco Engineering · Materials Reference
PlasticsABSPCPEEKPA12Materials

A practical engineering plastics comparison: ABS, PC, PEEK, PA12. Mechanical, thermal, chemical resistance, and cost. When to choose which polymer, and when to mix them.

There is no single 'best' engineering plastic. The right choice depends on temperature, chemical environment, cost, and how the part is made. This article walks through four of the most widely used engineering polymers and the framework we use when a customer asks 'what plastic should I use?'.

Headline properties

PropertyABSPCPEEKPA12
Tensile strength (MPa)406510048
Modulus (GPa)2.32.43.61.6
Max service temp (°C)70-80115-12526080-100
Density (g/cm³)1.051.201.321.01
Chemical resistanceAverageAverageExcellentGood
UV resistancePoorAveragePoor unless pigmentedGood
MachinabilityGoodAverageHardGood
3D-printable (MJF/SLS)NoNoLimitedYes
Relative cost1x1.5x10-15x2x

ABS: the everyday workhorse

ABS is the cheap, machinable, easy-to-paint plastic for housings, dashboards, consumer electronics enclosures, and prototype rapid iteration. It accepts adhesive bonding well and machines without melting if you use sharp tools and steady feeds.

  • Indoor consumer products and electronics housings.
  • Functional prototypes that need to look real.
  • Parts that need acetone vapor smoothing for cosmetic FDM.
  • Avoid: outdoor exposure, hot environments, strong solvents.

PC: when impact matters

Polycarbonate offers several times the notched impact strength of ABS and is far tougher than glass or acrylic; the often-quoted ~250x figure compares PC with glass, not with ABS. Bullet-resistant glazing, lab safety enclosures, and machine guards all rely on PC. It also has surprisingly good optical transparency when properly molded or polished.

PC is sensitive

Aggressive solvents (acetone, gasoline) will craze PC over time. UV exposure yellows it without UV-stabilized grades. Spec the right grade for outdoor parts.

PEEK: the high-performance polymer

PEEK is metal-like in performance: it survives 260 °C continuous service and resists nearly all chemicals. It machines to tight tolerances with sharp carbide tools and careful heat control, but it is more demanding than ABS or PA12 and needs stress-aware fixturing. The catch is cost: raw stock runs 10-15x more expensive than ABS.

  • Aerospace brackets and fluid components.
  • Medical implants (Implantable PEEK is a separate grade).
  • Oil and gas valve seats.
  • Semiconductor handling parts that see plasma.

PA12 (Nylon 12): the additive workhorse

PA12 is the powder-bed fusion default. Properties are isotropic enough to use it for end-use parts, and the chemical resistance is good for most non-aggressive environments. Pair it with carbon fiber reinforcement when stiffness matters.

Decision matrix

NeedPick
Cost-sensitive consumer enclosureABS
Impact-resistant coverPC
Optically clear partPC or PMMA
Continuous use above 130 °CPEEK
Chemical contact (solvents, fuels, oils)PEEK or PA12 (PEEK for strong acids)
3D-printed end-use partPA12 (or CF-PA12)
Outdoor structuralPC with UV stabilizer or PA12

Specifying plastics on Uretyco

Each platform quote shows compatible material grades for the chosen process. CNC quotes default to standard rod and sheet stock; injection molding quotes default to common pellet grades. Always check the data sheet for the supplier-specific grade: one supplier's 'PA6 GF30' is not the same product as another's.

Related articles

Was this page helpful?

Can't find what you need? Contact our team for expert assistance with your manufacturing project.

Contact our team